Description
These large capacity Smart autoclaves can adeptly handle standard tasks (e.g. media prep, waste loads, labware) but can also produce drier loads and more reliably handle complex loads that tend to trap air. Ideal for mixed waste loads, biological waste or pathogen-heavy materials, cloth and textile sterilisation, soil and substrate preparation, wrapped instruments, and porous loads.
These sterilisers feature fully customisable cycles (with expanded memory), pre-cycle and post-cycle vacuum, integrated cooling and free-steaming, and air intake filtration.
Features
• Lower handwheel on door is fitted with thermal and pressure locks to prevent opening at load temperature above 80°C and pressures above 0.2 bar
• Tactrol® 3 microprocessor control with simple and fully variable setting of process time, temperature with graphic indication of cycle status
• Automatic timed free-steaming
• Forced air cooling
• Pre-cycle vacuum in which multiple vacuum stages are programmed with interspersed heating to achieve steam penetration. Incorporates vacuum assisted cooling
• Pulsed free-steaming to maximise efficiency of Pre-cycle vacuum phase
• Media Warming and Delayed Start functions keep autoclaved media at a usable temperature ready for immediate use
• Low water level sensor
• Post-cycle drying for faster load drying
• Two full width non-tipping stainless steel load shelves
• Epoxy coated panels and frame members are treated with an anti-bacterial agent which is effective against all bacteria and fungi including MRSA
• Pressure vessel carries a 10 year warranty and is insurance approved
• Service and support direct from manufacturer (or appointed distributor)
Specification
Capacity (L):
450
Chamber Size:
675 x 900 x 755mm
Chamber Material:
Burnished 316 stainless steel
Loading Format:
Front Loading
Operating Range:
Up to 138°C, 2.4 bar
Heater Power:
32.5kW at 45A three-phase
Weight (kg):
770
External Dimensions (w x d x h):
909 x 1461 x 1785mm
Installation Dimensions:
Please allow 500mm (19.69”) either side and 300mm (11.81”) at the back of the autoclave
Door Swing (mm):
855
