Description
The Jeio Tech TH-TG-300 Floor Standing Temperature & Humidity Test Chamber, with a capacity of 314 litres, is an economical environmental test chamber that can be easily operated with its colourful, interactive touchscreen LCD controller.
Features
Performance
- Microprocessor PID control / Temperature calibration / Automatic tuning
- Advanced performance of low and high temperature and humidity control, achieved by adapting the humidification tank exterior to the chamber, added benefit for long term test
- Water recycling and filtering system reduce water consumption for longer operation
- Air-tight door closure
– Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber – Two-point door latch also enhances tightness of door closure
- Energy efficiency is achieved by optimisation of the insulation system
– Even if the unit is operating at max. temperature, the surface of the unit doesn’t allow high temperatures of over 60℃
Safety
- Built in door lock with a key
- Automatic shut off after over-heat alarm
- Low and empty water level alarm
- Power supply leakage breaker
- Over-current protection
- Open door alarm
Specification
Volume (L): 314
Controller: Programmable, touch-screen controller (140mm colour monitor)
Temperature (°C)
Range Without Humidity: -5 to +100
Range With Humidity: +10 to +90
Fluctuation at 40°C / 60%RH: ±0.3
Variation at 40°C / 60%RH: ±0.5
Heating Time Without Humidity (min): 50 from -5 to +100°C
Cooling Time Without Humidity (min): 120 from +100 to -5°C
Humidity (%RH)
Range: 10 to 95
Fluctuation at 60%RH / 40°C: ±2
Variation at 60%RH / 40°C: ±3
Refrigeration
System: Air-cooled
Refrigerant: R-507A
Water Tank
Capacity (L): 15
Water Quality: pH 6.2 – 7.2 / Electrical conductivity <20µs/cm
Shelves
No. of Wire Shelves (standard/max.): 2/8
Distance Between Shelves (mm): 60
Max. Load Per Shelf (Kg): 25
Permitted Total Load (Kg): 65
Dimensions; W x D x H (mm)
Internal: 748 x 600 x 700
External: 1201 x 907 x 1525
Viewing Window (mm): 200 x 330
Weight (Kg): 250
Ports
Cable Port: One Ø 50mm hole is provided. Optionally up to two additional holes, Ø 50mm or Ø 80mm, can be ordered.
Interface Port: RS-232C (RS-485 optional)
Electrical Requirements (230V, 1ph, 50/60Hz): 14.5A